Jigs and Accessories | TREND Accessories TREND KWJ900 900mm Kitchen Worktop Jig

Part No: KWJ900(TRENDKWJ900)KWJ900 Technical Specifications    Length: 1185 mm   Width: 390 mm   Thickness: 12 mm   Weight: 7.7kg   End Cut: 45 degrees   Corner Radius: 40 mm   Corner Radius: 100 mm   Corner Radius: 400 mm   Corner Mitre Joint: 45 degrees   Female cut material width loss: 35 mm   Bolt recesses: 3   Bolt recess centres: 300 + 300 mm   Bolt recess width: 14 mm   Guide bush: 30 mm   Plunge router: 1/2-inch (min. 1300 watts)   Cutter: 12.7 mm x 50 mm cut   Clamps: Two
KWJ900 Key Features    Tradesman ALL IN ONE work top jig for up to 900mm worktops    Hard wearing solid laminate 12mm thick jig that cuts both parts of the         joint in 15 minutes including setting up     Left hand and right hand corners, 400mm radius peninsular joint, 45         degree end cut with slight radius, 45 degree trade corner solution for hob         units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and         3/4inch BSP hole for mixer taps    Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and         900mm wide worktops     Cuts up to 40mm thick worktops with or without anti-drip postformed         edge    Three open-ended bolt recesses (dog bone style) for 150mm bolts     Engraved lines for short 65mm bolts and worktop cross-cut.1    0mm diameter plastic pins with tapered shoulder for tight fit provides         three point pin contact to ensure ease of setting up    Engraved markings for identification of pin holes    Pins made from ABS plastic for strength    Jig requires:A portable plunge router with 12.7mm (1/2 inch) shank         capacity and minimum 1300 watts    A template guide bush with 30mm outside diameter Ref GB30    A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut         length    Two clamps  
KWJ900 What’s  Included  Type: Worktop Jigs and Accessories