SDS Max Drills | MAKITA Power Tools MAKITA HR4013C 110v Rotary SDS MAX Hammer

HR4013C/1 Product OverviewThe HR4013C AVT Rotary  Demolition Hammer has a  powerful 1,000 watt motor, with soft start,  variable speed control and constant  speed control to automatically apply additional power to the motor to maintain  constant speed under load, to deliver up to 500 rpm, 2,900 ipm and 8.0 J impact  energy. It is equipped with one touch sliding chuck for quick and  easy bit  installations and removals, depth gauge for increased drilling  consistency,  torque limiter to prevent gear damage by automatically  disengaging the gears if  a bit binds and LED service light to indicate  when the carbon brushes require  replacing. Part No: HR4013C/1(MAKPHR4013C-1)HR4013C/1 Technical Specifications    Max. Bit Diameter: 40 mm   Max. in Concrete: 40 mm   Max. TCT Core: 105 mm   Input Wattage: 1,000 W   Impact Energy Per Stroke: 8 J   No Load Speed: 250 – 500 rpm   Impacts Per Minute: 1,450 – 2,900 bpm   Vibration RH: 5 m/sec²   Vibration HO with D handle: 4.5 m/sec²   Net Weight with Side Handle: 6.7 kg   Net Weight with D Handle: 6.8 kg   ULTRA-LOW VIBRATION
HR4013C/1 Key Features    Model HR4013C is the successor model of the current HR4001C series models     and developed to provide higher operating efficiency and more comfort with     unrivalled low level of vibration.    One touch sliding chuck for easy bit installation and removal.    Easy to operate operation-mode change lever. Located on the top of the     motor housing for reduced possibility of breakage.    ‘Soft no load’ function automatically reduces the motor speed during     idling to suppress the vibration of the machine body.    Unrivalled low level of vibration aided by vibration absorbing     housing.    LED service light indicates when to replace carbon brush.    In hammering mode, on/off switch is switchable between two switches to     meet your application: For Continous or Intermittent chiseling     applications.  
HR4013C/1 What’s  Included    Grease    Side Handle    Depth Gauge    Cloth    Carrying Case   Please NoteThis is a 110v machine and must be used in conjunction with a power tool transformer.